Basement leak


Basements that leak water through the joint where the floor and wall meet after a rain or snow melt (basement corners), the most common wet basements. Most of the wet basements leak water from the walls and the joint where the floor and wall meet, mainly in the corners. Most basements rarely leak water up through the floor. These are created due to the improper construction of the basement. Surface water collects and builds up in a small place around the foundation that causes hydrostatic pressure. Water is then forced through the corners where the floor and wall meet.
Basement waterproofing
The basement waterproofing has really proved perfect in its functions as its main purpose to protect the basements from leakage. Basement waterproofing begins outside the home and comes along the corners. Corners are to be checked that contribute to the collection of water next to the foundation. Gaps are to be avoided so water flows away from the foundation. Gutters are to be checked for debris and downspouts are to be extended at least 8 feet from the house. Water going inside to the basement corners is to be adjusted to flow away from the foundation.
To cure a new concrete slab
If water evaporation is slowed down, the key to a denser and stronger concrete. Any sealing material can be used on freshly poured concrete slabs as a curing sealer instead of water misting or temporary sealers. It slows down water evaporation by plugging up the pores in concrete. Unlike wax or chemical sealers, it leaves the surface suitable for painting or tile adhesive. As concrete cures, it inevitably develops capillaries. Allow the concrete to cure for at least 28 days and then, deep-seal the slab and walls with any sealing material in 2 applications. This seals the concrete against water, vapor, and radon, bonds and strengthens the concrete.
In case of concrete block walls, let the mortar cure for at least 14 days before applying any sealing material. Any visible cracks in the concrete are to be checked for leaks, the floor-to-wall joints, expansion control joints in the floor, and all penetrations.
The last is the test for moisture transmission through the concrete: So, place a foot-square of plastic or aluminum foil on the floor or wall, seal the edges with duct tape, and check after a couple of days for drops of water.

Basement Bar
A basement bar is a good idea to enjoy an evening with friends and family or even have a party. There are a few important things one needs to take care of before building a basement bar. These steps will help make the bar a real good place to enjoy...

Basement Mold
Basement mold is a problem faced by most homeowners. It is almost impossible to keep moisture away from basements. Cracks or joints of walls and floors can result in water leaking into basement. If this moisture is not dried away quickly, it can...

Dry Basement
A dry basement is not necessarily one that is not flooded. Leakages and water seepage may cause wet basements too. A dry basement is one that is completely rid of moisture or water that can come in through walls, floors or vents and joints that are...

Basement
© www.MyHomeTopics.com 2006